Oki ES4192dn User Manual - page 810
of
1228
Adjusting the Density When Printing
This section describes how to change the default setting of the density when printing. You can adjust the density in five levels.
1.
Press [Device Settings] on the touch panel.
2.
Press [Admin Setup].
3.
Enter the administrator password.
The factory default password is "aaaaaa".
4.
Press [OK].
5.
Press [Print Setup].
6.
Press [Print Menu].
7.
Press [Printer Adjust].
8.
Press [Darkness].
9.
Select a value.
10.
Press [Back] until the home screen is displayed.
Memo
[0] is the standard value. To increase the density for printing, select [+1] or [+2] (darkest). To decrease the density for printing,
select [-1] or [-2] (lightest).
809