Oki ES4192dn User Manual - page 1175
Setting the LDAP Server
Memo
For details on the LDAP server and encryption setting, contact your network administrator.
1.
Open the Web page of this machine.
About the IP address of this machine
Setting an IP Address from the Operator Panel on This Machine
How to log in to the Web page
About the Web Page of This Machine
2.
Log in as the administrator.
How to log in as the administrator
About the Web Page of This Machine
3.
Select [Admin Setup].
4.
Select [Network] > [LDAP].
5.
Enter the domain name or IP address of the LDAP server in [LDAP Server].
6.
Enter the port number of the LDAP server in [Port Number].
7.
Specify a value of time-out to wait for the search results in [Timeout].
8.
Specify the maximum number of the search result entries in [Max. Entries].
9.
Specify a BaseDN to access the LDAP server in [Search Root].
10.
Enter attribute names to search as the user name in [User Name].
Be sure to enter a value in [Name 1].
11.
Enter an e-mail address to search for in [Mail Address].
12.
Specify a search condition in [Additional Filter] if necessary.
13.
Select a necessary authentication method in [Method].
Note
If you select [Anonymous] or [Simple], user authentication using LDAP fails. You must select [Digest-MD5] or [Secure Protocol]
if you want to set the LDAP server for the user authentication.
Memo
If you select [Digest-MD5], you must set the DNS server.
If you select [Secure Protocol], you must set both the DNS server and secure protocol server.
14.
If you select other than [Anonymous] in step 13, specify the user ID and password to log in to the
LDAP server.
15.
Select the encryption method in [Encryption].
16.
Click [Submit].
The new settings take effect when the network function of this machine restarts.
1174