Oki ES4192dn User Manual - page 79
of
1228
Specifying a Sender and Reply Destination
Setting a Sender's Address
1.
Press [Device Settings] on the operator panel.
2.
Select [Admin Setup].
3.
Enter the administrator password.
4.
Press [OK].
5.
Press [Scanner Setup].
6.
Press [E-mail Setup].
7.
Press [From/Reply To].
8.
Press [From].
9.
Enter an e-mail address.
10.
Press [OK].
11.
Press [Back] until the top screen is displayed.
Setting a Reply Address
1.
Press [Device Settings] on the operator panel.
2.
Select [Admin Setup].
3.
Enter the administrator password.
4.
Press [OK].
5.
Press [Scanner Setup].
6.
Press [E-mail Setup].
7.
Press [From/Reply To].
8.
Press [Reply To].
9.
Specify a destination.
10.
Press [Back] until the top screen is displayed.
78