Oki ES4192dn User Manual - page 1142
Registering a User Name and Password from Configuration Tool (Windows Only)
You can restrict access to this machine by using a user name and password.
If you click
(Save to device), the changed settings are reflected to this machine.
For details on Configuration Tool, refer to "Using Configuration Tool (Windows Only)".
For the icons in Configuration Tool, refer to "About Configuration Tool".
Creating a New User
1.
Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [PIN Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Click (New(User)).
7.
Enter the user name and password.
Memo
"Admin" cannot be registered as a new user name.
8.
Select either an existing PIN from [PIN Number] or select [New].
9.
If you select [New], enter the PIN number in [New PIN Number], set each value if necessary, and then
click [OK].
10.
Click [Close].
11.
Click (Save to device).
Changing User Settings
1.
Click [Start], and then select [All programs] > [Okidata] > [Configuration Tool] > [Configuration Tool].
2.
Select the machine from [Registered Device Table].
3.
Select the [User Setting] tab.
4.
Click [PIN Manager].
5.
Enter the administrator password, and then click [OK].
The factory default password is "aaaaaa".
6.
Select the user name to change.
7.
Change settings if necessary, and then click [OK].
8.
Click (Save to device).
1141