Oki ES4192dn User Manual - page 167
Using Network Configuration (Windows Only)
Registering the Machine (New Machine) to Network Configuration
Changing the Scanner Driver Name of the Registered Machine
Changing the Setting Information of the Registered Machine
Unregistering Computer Information that is Registered to the Machine
About Network Configuration
Network Configuration is a tool to set in advance when performing Scan to PC. Also, if information, such as the IP address of the
machine or computer, is changed when performing a network scan, you can change the setting values with this tool.
When you install ActKey, Network Configuration is also installed at the same time.
When you start a computer, Network Configuration is automatically included in the task bar.
Start Network Configuration by following the procedure below.
1.
Click [Start], and then select [All Programs] > [Okidata] > [ActKey] > [Tools] > [Network
Configuration].
2.
Right-click [Show Network Configuration] in the task tray.
The scanner driver that is installed in the computer is displayed.
Registering the Machine (New Machine) to Network Configuration
1.
Click [Start], and then select [All Programs] > [Okidata] > [ActKey] > [Tools] > [Network
Configuration].
166