QMS 2060 User Manual - page 100
Manual is about: Print System
of
258
Printing on
Different Types
of Media
QMS 2060 WX Print System User's Guide
3-16
n
Load the envelopes short edge first. Use envelopes with the flap
toward the rear of the printer when loaded.
n
Print on the front side only.
n
Try to print only in one-layer parts of the envelope. Some parts of
the envelope consist of three layers of paper—the front, back,
and flap. Print in these layered regions may be lost or faded.
Printing
1
Format the text in your
application.
2
Place the envelopes on a flat
surface and flatten them by
pressing down the corners in
the direction shown.
3
Flex the envelope stack (includ-
ing the edges) to remove any
stiffness.
4
Correct any dog-eared corners,
then tap the envelopes on a flat
surface to align.