QMS 2060 User Manual - page 86
Introduction
QMS 2060 WX Print System User's Guide
3-2
Introduction
This chapter describes how to refill the media cassette, print on differ-
ent types of media, prevent media jams, and cancel a print job.
Refilling the Media Cassette
The QMS 2060 WX Print System comes standard with a 250-sheet
universal cassette. However, optional 250-sheet (letter/A4 or univer-
sal) and 500-sheet (letter/A4 only) cassettes are also available.
Loading media in any cassette involves the following steps:
n
Prepare the paper
n
Load the cassette
Preparing the Paper
»
Note:
Ensure that the media size matches the cassette size (for
example, letter/A4 media must be loaded only when t he universal
cassette is set to letter/A4 size or when a letter/A4 cassette is used).
Since the media cassette sends a media size signal to the printer
controller, using a wrong size media will cause your image to be
positioned incorrectly on the page or clipped.
1
Unwrap the paper, and pull the stack out
»
Note:
Paper is packed in reams of 500 sheets. Do not unpack the
paper above the printer as this might cause particles to fall into
the printer components. Note the arrows on the wrapper. They
show which side of the paper should be on the top when it’s
loaded in the cassette.
2
With one hand at each end of the stack, lift and hold it in a
curved position, without gripping.
3
Grip each end of the stack firmly.