QMS 2060 User Manual - page 177

Printer Status

Messages

8-3

Troubleshooting

This message...

indicates...

» Note: 

Shaded table cells indicate that the message scrolls.

Asic error

There is an application specific 

integrated circuit (ASIC) problem. Call 

for service.

Bad entry

You have made an illegal entry in the 

configuration menu.

Booting

The printer is starting up.

Canceling jobs

All pages currently received by the 

printer are being cancelled.

Controller error

There is a controller problem. Call for 

service.

Cover open

The top cover on the printer is open.

Download error 

press Cancel

An error has occurred in the system 

software download procedure. Press the 

Cancel key on the printer control panel, 

and restart the download procedure. If 

this error appears again, call for service.

DRAM test error

There is a DRAM or controller board 

problem. Call for service.

Duplex cover open

You are trying to duplex print, but the 

cover on the duplexer is open.

Duplex error

There is a duplexer problem. Call for 

service.

Duplex jam

Media has jammed in the duplexer. 

Remove the jam (see *“Clearing a 

Duplexer Media Jam” on page 8-23).

Energy save mode 

on

Energy Saver mode is currently in effect. 

Erasing flash

The old system software is being erased 

from flash memory.