QMS 2060 User Manual - page 127
Printer
Configuration
4-11
Control Panel
Setting the Subnet Mask
The Subnet Mask menu allows you to set the printer’s subnet mask.
The address is in the format
xxx
.
xxx
.
xxx
.
xxx
.
Menu
Subnet mask
Choices
Each
xxx
.
xxx
.
xxx
.
xxx
triplet can have a value of 001–
254.
Default
000.000.000.000
Notes
n
If subnets are not used with your network, the sub-
net mask should remain 000.000.000.000. (Check
with your network administrator.) This allows the
interface to provide automatic sensing of gateways.
If you identify a subnet mask, this automatic sens-
ing is disabled.
n
Once you save your changes to this menu, the
printer automatically reboots.
n
The address must consist only of numbers and
periods. Selecting a letter or another symbol
results in an error message.
n
Any
xxx
value between 1 and 9 must begin with 00
(for example, 1 is entered as 001, and 9 is entered
as 009).
n
Any
xxx
value between 10 and 99 must begin with
0 (for example, 10 is entered as 010, and 99 is
entered as 099).