QMS 2060 User Manual - page 180
Printer Status
Messages
QMS 2060 WX Print System User's Guide
8-6
Need more memory
Paper mismatch
More memory is needed to print the job,
and
the media in the media cassette is
different from that chosen in the printer
driver.
» Note: Due to the lack of sufficient
memory, parts of the image may be
clipped off.
Need new kernel
The kernel is damaged. Download the
system software again (see “Updating
System Software” in chapter 5, “Printer
Options”).
New kernel...
The kernel is being downloaded during
the system software downloading
process.
Outer jam
Media has jammed leaving the paper
exit unit. Remove the jam (see “Media
Jams” on page 8-15).
Paper out lower
tray
Paper out manual
feed
Paper out upper
tray
The indicated media cassette is empty;
reload the cassette. (See chapter 3,
“Printing,” for information on refilling
cassettes.)
Parallel port
The printer has identified a parallel
interface connection during startup.
Print job active
The PC is sending a job to the printer.
Printing
The printer is on line and printing.
This message...
indicates...
» Note:
Shaded table cells indicate that the message scrolls.