QMS 2060 User Manual - page 120
About the
Control Panel
QMS 2060 WX Print System User
’
s Guide
4-4
The Control Panel Indicators
Four LED indicators provide printer status information.
On —The printer is on line and ready to
accept new print jobs. Press the
Online/Offline key once to take the
printer off line (the indicator goes out).
Off—The communication port is closed, so
no new data is accepted. The printer
continues printing until it has finished
all jobs in process. Although jobs
continue to compile and print using the
data already received, a job may be
interrupted, causing it to wait for more
incoming data before printing resumes.
Press the Online/Offline key once to
put the printer back on line and ready to
accept new print jobs (the indicator
goes back on).
Blinking—The printer is sleeping (in
Energy Saver mode) or warming up, or
an engine error has occurred. Check
the message window.
Blinking—The printer is receiving data
from the PC.
On—An optional printer hard disk is being
accessed.
Blinking—System software is being
downloaded to FLASH.
On—An error message is displayed in the
message window.