QMS 2060 User Manual - page 150
Updating the
Printer Drivers
QMS 2060 WX Print System User
’
s Guide
5-20
»
Note:
As the printer reboots, watch the message window for a
message verifying the amount of memory currently installed in
the printer and identifying the current version number of the
system software (for example,
8 Meg ver 2.01
).
6
Remove the disk or CD-ROM from the PC, and store it in a
safe place.
Updating the Printer Drivers
Windows 95 Printer Driver
»
Note:
If you want to update the Windows NT printer driver, refer to
“Windows NT 3.51 Printer Driver” on page 5-22 or “Windows NT 4.0
Printer Driver” on page 5-24.
1
From the Windows 95 Start menu choose Settings.
2
From the Settings menu choose Printers.
3
If it’s installed, select the QMS 2060 WX printer driver in the
Printers window.
4
From the File menu choose Delete.
Select Yes when you’re asked if you’re sure you want to delete the
printer.
5
Shut down your PC in the usual way.
6
If you’re using a parallel connection, continue with the next
section, “Parallel Connections.”
If you’re using an Ethernet network connection, skip to
“Ethernet Connections” on page 5-21.
Parallel Connections
Windows 95 and the parallel port on the QMS 2060 WX both support
Plug and Play technology, which lets your PC and its attached devices
work together automatically. The correct printer driver is automatically