QMS 2060 User Manual - page 214
Uninstalling the
QMS Network
Print Monitor for
Windows 95
QMS 2060 WX Print System User's Guide
8-40
Uninstalling the QMS Network
Print Monitor for Windows 95
Use this procedure if you ever need to uninstall the Print Monitor for
Windows 95:
1
From the Start menu, choose Settings.
2
From the Settings menu, choose Control Panel.
3
In the Control Panel dialog box, choose Add/Remove Pro-
grams.
4
On the Install/Uninstall tab select QMS Print Monitor.
5
Choose Add/Remove.
6
In the Welcome window, choose OK.
7
If a Delete QMS Monitor window appears, continue with step 8.
The Print Monitor is in use and cannot be deleted until it is no
longer in use. If this window doesn’t appear, you have success-
fully uninstalled the Print Monitor.
8
Go to the Start menu and choose Settings.
9
From the Settings menu, choose Printers.
10 In the Printers dialog box, double-click on the printer that
has the Print Monitor installed.
11 In the QMS Print Monitor window, from the Printer menu
choose Properties.
12 In the QMS Properties window, choose the Details tab, scroll
down in the Print to the following port: listing and select a
port not associated with the QMS Print Monitor.
13 Choose Apply and then choose OK.
14 Repeat steps 1 through 6 to complete the uninstallation of
the Print Monitor.
»
Note:
All files associated with the Print Monitor installation and all
QMS ports associated with the Print Monitor are removed.