QMS 2060 User Manual - page 174
Repack the
Printer
QMS 2060 WX Print System User
’
s Guide
7-4
Repack the Printer
M
WARNING!
The printer weighs about 53 lbs (24 kg). Don’t lift it by
yourself.
ACHTUNG!
Der Drucker wiegt ca 23 kg; bitte versuchen Sie
niemals, das Gerät alleine anzuheben oder zu tragen.
1
If you have an optional duplexer, remove it from the printer,
and repack it in its original shipping carton. Otherwise, skip
to step 3.
2
If you have an optional feeder, remove it from the printer, and
repack it in it’s original shipping carton. Otherwise, skip to
step 3.
3
Put the printer back in its original protective plastic bag.
4
Get someone to help you with this step: Lift the printer back
into its original shipping carton.
»
Note:
If you’re returning the printer for service, you don’t need to
return the toner, media cassette(s), power cable, interface cables,
or optional duplexer or feeder.
3
Repack the toner cartridge to its original protective alumi-
num bag and shipping carton.
»
Note:
The toner cartridge is sensitive to bright light. Do not
remove the cartridge from the printer until you’re ready to return it
to its protective bag. Store the cartridge in an environment that is
not subject to extreme heat or humidity, salty air, or corrosive
gases, such as aerosols. Keep the toner cartridge away from your
computer. The magnets in the cartridge can damage data,
particularly on your floppy disks.
If you’re disposing of the toner cartridge, put it in a trash
receptacle. Don’t dispose of it by burning.
4
Close the printer’s top cover.
v