QMS 2060 User Manual - page 143
Single In-Line
Memory Modules
(SIMMs)
5-13
Printer Options
Some applications use hard disk storage on the PC to render the
image. However, in all Windows environments, if the PC runs out of
memory, Windows informs you. If this happens, you have the option
of allowing the printer to start printing the job while it is still being
spooled rather than waiting for it to be completely spooled before
starting the print process. (See “Files Fail to Print” in chapter 8, “Trou-
bleshooting” for more information.)
Printer
Typically, most files print with the 8 MB of memory that comes
standard on your QMS 2060 WX. However, some files may exceed
this amount. If the printer doesn’t have enough memory, a
Printing
need more memory
message displays in the printer’s message
window.
Installing a SIMM
M
WARNING!
This option—which requires access to the controller
board—should be performed only by a qualified QMS service
technician. Turn off the printer and unplug the power cord before
taking the cover off the printer.
ACHTUNG!
Arbeiten am QMS Controller sollten nur von
qualifiziertem Servicepersonal durchgeführt werden. Bitte schalten
Sie den Drucker aus und ziehen Sie den Netzstecker heraus bevor
Sie die Druckerabdeckung öffnen.
s
Caution:
This hardware change automatically restores defaults.
It's very important to protect the controller board from electrostatic
damage while performing this task.
If an anti-static wrist strap is provided in your printer option kit,
attach one end of it to your wrist and the other end to any convenient
electrical ground (for example, the bare metal chassis of equipment,
as on the back of a computer, that is plugged in but turned off).
Never attach the wrist strap to any piece of equipment with an
electrical current present. Turn off all power switches first. Plastic,