QMS 2060 User Manual - Drive
Updating the
Printer Drivers
5-25
Printer Options
12 In the Install from Disk dialog box, type
drive
:\
(where
drive
is the letter of the disk drive in which you
inserted the QMS 2060 WX printer driver disk in step 1). and
choose OK.
QMS 2060 WX printer displays in the list box.
13 Select the QMS 2060 WX printer, and then choose Next.
14 If you’re replacing an existing Windows NT 4.0 printer driver,
perform this step; otherwise, skip to step 15.
a
When prompted, choose Replace Existing Driver, and then
choose Next.
b
When prompted, for a printer name, either accept the
displayed name or type a new one, and then choose Next.
»
Note:
If you’re updating a currently installed QMS 2060 WX on a
Windows NT 4.0 station, always choose to replace the existing driver.
Otherwise, when you’ve finished the installation, a second QMS
2060 WX icon, named “Copy 2,” is displayed in the Printers window.
15 When prompted for sharing information, choose either
Shared or Not Shared, and then choose Next.
n
If you chose Not Shared, skip to step 16.
n
If you chose Shared, provide the sharing information.
a
In the Share Name edit box, type the name of the printer.
This is the name displayed when your PC is connected to
the printer.
b
If you’re sharing your printer with a Windows NT 4.0
workstation, choose OK and go to step 16.
If you’re sharing your printer with a Windows 95
workstation, in the Alternate Drivers list box, select the
Windows 95 operating system, and choose OK.
If the operating system on your PC does not have the
QMS 2060 WX printer driver for Windows 95, you’ll be