QMS 2060 User Manual - page 48
Configuring the
Windows NT 4.0
Printer Driver
QMS 2060 WX Print System User's Guide
2-34
Configuring the Windows NT
4.0 Printer Driver
This section explains how to configure the QMS 2060 WX Print
System Windows NT 4.0 printer driver, and it describes all of the
available options. Context-sensitive Windows on-line help is also
available while you’re configuring the printer driver. Just choose the ?
button in the driver dialog box, and then select any driver option for
more information.
»
Note:
If you’re using Windows 95, refer to “Configuring the Windows
95 Printer Driver” on page 2-2 for complete information.
Methods of Configuration
There are three methods you can use to configure the printer driver.
However, these three methods don’t all have the same options.
This section explains how to use these three methods. The following
sections explain the options available through each configuration
method.
Setting Printer Properties
1
From the Windows NT Start menu choose Settings.
2
From the Settings menu choose Printers.
3
In the Printers window, select the QMS 2060 WX printer icon.
4
From the File menu choose Properties.
Six tabs appear in the QMS 2060
WX Properties window:
General, Ports, Scheduling, Sharing, Security, and Device
Settings.
For information on all the tabs except Device Settings, refer to your
Windows NT 4.0 documentation. For information on the Device
Settings tab, see “Configuring Device Settings” on page 2-36.