QMS 2060 User Manual - page 146
Manual is about: Print System
of
258
Single In-Line
Memory Modules
(SIMMs)
QMS 2060 WX Print System User
’
s Guide
5-16
7
Insert the new SIMM into the SIMM connector.
Hold the SIMM at a 45° angle to the controller board, with the
notch on the right side and the bottom edge is in the connector.
»
Note:
You can insert a SIMM in either SIMM connector as long as
DRAM0, and the SIMM connector before the one you’re installing,
is occupied.