QMS 2060 User Manual - page 200
Output Problems
QMS 2060 WX Print System User's Guide
8-26
Only Partial Pages Print
n
Check the imageable areas for the size media you’re using (see
chapter 3, “Printing”). Are you trying to print outside of the image-
able area of the page? If so, change to a larger size media, or
adjust the margin(s) through your application.
n
The charger unit or various roller and plates may be dirty. See
chapter 6, “Maintenance,” for instructions on how to clean these
parts.
n
Check for a
Printing need more memory
error message in
the message window. The job may have been too complex for the
amount of memory currently installed in the printer. You have
these options:
-
If you’re using Windows 95, change to Coarse dither in the
printer driver
-
Add more memory
See “Single In-line Memory Modules (SIMMs)” in chapter 5,
“Printer Options,” for a discussion of how the PC and printer use
memory.
Blank Pages
If one or more blank pages “print” during a print job, try the following:
1
Check the toner cartridge.
The image does not print if the cartridge is empty.
2
Be sure you have broken the tab on the side of the toner car-
tridge and removed the tape seal.
3
If the toner cartridge is not empty, the sealing tape has been
removed, and blank pages are ejecting, take the cartridge
out, roll it from side to side, and reinstall the cartridge in the
printer.
4
If these solutions do not work, contact your QMS vendor to
purchase another toner cartridge.