QMS 2060 User Manual - page 91
Refilling the
Media Cassette
3-7
Printing
500-sheet Cassette
»
Note:
Reload the media cassette only when it’s empty.
1
Pull out and remove the cassette.
3
Load media in the cassette in increments, so that 500 sheets
fit in the cassette and the media stack is properly leveled out.
Load the media so the front end of the stack comes against the
front of the cassette in three steps as follows:
2
Position the cassette.
The cassette has a
spring in the bottom that
provides some resis-
tance when print media
is placed on it.
Lay the cassette flat on
a hard surface and,
using your left hand,
push down on the plate
in the cassette until it
locks.
a
Up to the bottom limit mark.
b
Halfway to
the top
limit mark.
c
Up to the
top limit mark.
Top Limit
Bottom Limit
Retaining
Clips