QMS 2060 User Manual - page 124
Printer
Configuration
QMS 2060 WX Print System User
’
s Guide
4-8
Accessing the Configuration Menu
To access the configuration menu, make sure the printer is idle (
Idle
displays in the message window), then press the Online/Offline key to
take the printer off line (the Ready indicator is not lighted), and finally
press the Menu key.
For example, the following table shows how to use control panel keys
to access the printer configuration menu. Press the control panel keys
in the order shown. The printer responds by displaying a status mes-
sage or configuration menu in the message window.
»
Note:
The printer must be off line and idle before you can access the
configuration menu.
Selecting Configuration Menu Options
Once you access the configuration menu, you use the control panel
keys to move through the menu. Use the following keys:
Press
this key
to...
The message
window reads...
Online/
Offline
Turn off the Online indicator and ready the
printer for configuration.
Idle
Menu
Access the configuration menu.
Energy saver
Press this key...
to...
Menu
Advance through the available menus: Energy
saver, Language, Internet address, Subnet mask,
Router 1, Router 2, and Eth. HW address
(Ethernet Hardware address). (Service and
Board Test have different functions. They are
explained in chapter 8, “Troubleshooting.”)
Select
Save an option.
Next
Advance to the next option within a menu.
Previous
Return to the previous option within a menu.