QMS 2060 User Manual - page 16
Introduction
QMS 2060 WX Print System User's Guide
2-2
Introduction
This chapter explains how to configure the QMS 2060 WX printer
drivers, share the printer, and use the QMS Network Print Monitor.
Configuring the Windows 95
Printer Driver
This section explains how to configure the QMS 2060 WX Print System
Windows 95 printer driver. Windows on-line help is also available while
you’re configuring the printer driver. Just choose any Help button.
»
Note:
If you’re using Windows NT, refer to either “Configuring the
Windows NT 3.51 Printer Driver” on page 2-12 or “Configuring the
Windows NT 4.0 Printer Driver” on page 2-34.
Setting the Printer Driver Defaults
»
Note:
Changes you make here apply to all documents. However,
most changes you make through your application override these
settings (see “Special Notes on Orientation” in chapter 3, “Printing”).
1
Open the printer driver.
a
From the Windows 95 Start menu choose Settings.
b
Choose Printers.
2
In the Printers window, select the QMS 2060
WX printer driver.
3
From the File menu choose Properties.
The following tabs appear:
n
General—Allows you to name the printer, use a separator
page, and print a test page. See your Windows documentation.
n
Details—Allows you to set interface connection details. See
your Windows documentation.