QMS 2060 User Manual - page 96
Printing on
Different Types
of Media
QMS 2060 WX Print System User's Guide
3-12
Printing on Different Types of
Media
Transparencies
Your printer supports label printing from the multipurpose tray (up to 5
sheets).
Special Considerations
n
Use transparencies that can withstand the fusing temperature
(200
°
C/392
°
F). We recommend 3M type PP2500 transparen-
cies, letter or A4 size.
n
Insert the transparencies short-edge first, printing side up with
the top of the page on the left side of the tray. The correct print
side is usually marked on the transparency package.
n
Load up to 5 transparencies at a time in the multipurpose tray.
Loading a larger number of transparencies at a time may cause
static buildup.
n
Keep the paper path clean. Transparencies are especially sensi-
tive to a dirty paper path. If there are shadows on either the top or
the bottom of the sheets, refer to chapter 6, “Maintenance,” for
instructions on how to clean the printer.
n
Remove each transparency from the output tray before the next
sheet is printed to prevent jams or misfeeds.
Printing
1
Format the transparencies in your application.
2
Load the transparencies in the multipurpose tray.
See “Multipurpose Tray” on page 3-8 and “Special Consider-
ations,” above, for information on loading transparencies.
»
Note:
You may want to try printing the formatted information on a
plain sheet of paper first to check placement.