QMS 2060 User Manual - page 128
Printer
Configuration
QMS 2060 WX Print System User
’
s Guide
4-12
Setting the Router Address
The Router 1 and Router 2 menus allow you to set the Internet
address of one or two routers. The addresses are in the format
xxx
.
xxx
.
xxx
.
xxx
.
Menu
Router 1
Router 2
Choices
Each
xxx
.
xxx
.
xxx
.
xxx
triplet can have a value of 001–
254.
Default
000.000.000.000
Notes
n
If gateways are not used with your network, the
router 1 and router 2 addresses should remain
000.000.000.000. (Check with your network admin-
istrator.)
n
Once you save your changes to this menu, the
printer automatically reboots.
n
Each address must consist only of numbers and
periods. Selecting a letter or another symbol
results in an error message.
n
Any
xxx
value between 1 and 9 must begin with 00
(for example, 1 is entered as 001, and 9 is entered
as 009).
n
Any
xxx
value between 10 and 99 must begin with
0 (for example, 10 is entered as 010, and 99 is
entered as 099).