QMS 2060 User Manual - page 28
Configuring the
Windows NT
3.51 Printer
Driver
QMS 2060 WX Print System User's Guide
2-14
n
Printer details—Availability From/To, Separator File, Print to
Additional Ports, Delete Port, Priority, Print Processor, Default
Datatype, Print Directly to Ports, Hold Mismatched Jobs,
Delete Jobs After Printing, Job Prints While Spooling, Print
Spooled Jobs First, and Job Defaults
Choose the Details... button to access these options. See
your Windows NT documentation for more information on all
of these except Job Defaults. For more information on Job
Defaults see “Setting Job Defaults (Document Properties)” on
page 2-22, “Setting Job Defaults (Advanced Document Prop-
erties)” on page 2-25, and “Setting Job Defaults (Halftone
Color Adjustment Properties)” on page 2-28.
n
QMS port configuration—Timers, Events to Log, and
Audible Alert
Choose the Settings... button to access these options for the
QMS Network Print Monitor. See the on-line help (choose the
Help button in the Configure QMS Port dialog box) or the
QMS Network Print Monitor for Windows NT Administrator’s
Guide for more information.
5
Make your changes.
6
Choose OK.
Setting Printer Setup Options
»
Note:
Changes you make here apply to all documents. However,
most changes you make through your application override these
settings (see “Special Notes on Orientation” in chapter 3, “Printing”).
Use the following procedure to access these options:
1
Open Print Manager.
2
Select the printer’s icon or window.
3
From the Printer menu choose Properties.