QMS 2060 User Manual - page 147
Manual is about: Print System
of
258
Single In-Line
Memory Modules
(SIMMs)
5-17
Printer Options
8
Tilt the SIMM up to a 90° angle until you feel it snap into
place.
When seated, the SIMM stands upright, firmly in place. If you
cannot snap the SIMM into place, do not force it. Reposition it,
making sure that the bottom of the SIMM is seated completely in
the connector.
9
Repeat steps 6-8 for each additional SIMM being installing.