Mad Dogg Athletics crosscore Owner's Manual - page 15
CrossCore® Equipment Information
|
6
© 2016 Mad Dogg Athletics, Inc. All rights reserved.
CrossCore® User Guide & Manual
CROSSCORE® HOME KIT
Includes:
1 Door Strap with Door Anchor and 1 Door Pad.
BEFORE USING THE HOME KIT, DOOR STRAP AND DOOR ANCHOR, FIRST READ THESE “SAFETY
PROCEDURES AND INSTRUCTIONS”.
Take the closed loop end of
the door strap and insert it
through the back of the door
pad. Continue feeding it through
one side of the top of the pulley
housing. Then insert one “E-clip”
into the loop, and then the other
“E-clip” into the loop. Once both
sides are inserted in the loop, the
system will then be secure on the
door strap.
Place the door anchor attached
to the door strap over the top of
a door on the side of door closest
to hinges. The door chosen must
be secure enough to easily hold
the user’s weight. Close the door
and pull on strap to make sure the
anchor is secure and will support
your bodyweight. Make sure to
perform this safety test to ensure
strap and anchor a fully secured in
place before using the CrossCore®.
Failure to do so could result in
injury.
When letting go of the handles,
walk towards the door first and
gently place them down towards
the ground to further protect the
door. Do not let them handles
swing freely towards the door
as this can cause damage to the
surface of the door.