NEC WL1700-MS Installation Manual - page 102
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Access Point Installation
Chapter 3
INSTALLATION
68
Tabletop Mounting
Note.
The following steps are explained using WL1500-AP. In the case of installing
WL1700-MS, follow the same steps as explained below.
1
Insert a Phillips driver into the driver slot labelled Unlock, and push it until a
click is heard. Remove the mounting brackets from WL Access Point.
UNIVERGE WL 1500-AP
Mounting Bracket
Table Mounting Rubbers