NEC WL1700-MS Installation Manual - page 204
Configuration Management
Chapter 6
SYSTEM MAINTENANCE
170
Restore backup configuration file saved in TFTP Server
To restore configuration file saved in TFTP Server, type the following command.
Using CLI
Use
restore system {TFTP Sever address and file name}
.
For example, save it as System-backup in TFTP Server (192.168.0.1).
The following will be restored from TFTP Server.
- Boot configuration file
- Digital certificate file
If you want to back up all the configuration files, put an optional parameter
“all” after the command. For example:
Using WebView
Select
[Commands]
-
[Restore System]
. And then specify necessary
information and click the
Restore
button.
The following will be restored in TFTP Server
- All configuration file (when
all
is typed as optional parameter)
- Boot configuration file (when
critical
is typed as optional parameter)
- Digital certificate file
Note.
Use the Copy command to back up configuration file into TFTP Server. For more
.
Delete Configuration Files
To delete configuration file, type
delete {file name}
.
WL111111#
restore system tftp://
192.168.0.1
/
System-backup
WL111111#
restore system tftp://
192.168.0.1
/
System-backup all