NEC WL1700-MS Installation Manual - page 99
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Access Point Installation
Chapter 3
INSTALLATION
65
Attaching APs to Rigid Wall or Ceiling
Note.
The following steps are explained using WL1500-AP. In the case of installing
WL1700-MS, follow the same steps as explained below.
1
To attach an AP to ceiling, make holes in the appropriate parts of the ceiling
by using the mounting template.
2
Insert a Phillips driver into the driver slot labelled Unlock, and push it until a
click is heard. Remove the mounting bracket from WL Access Point.
Mounting Template
UNIVERGE WL 1500-AP
Mounting Bracket
Wall Anchors