NEC WL1700-MS Installation Manual - page 83
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Cable Connection
Chapter 3
INSTALLATION
49
Power Cable Connection
1
Insert an AC power cable into AC socket located on the rear side. Before
doing this, make sure the power of the Controller is set to OFF.
Note.
For ground connections, Class A grounding
is required for SCA-WL10, and Class
D grounding is required for WL5100.
l
In the case of installing WL5100
Connect the AC power cable to an AC socket on the right.
Rear View
1
2
AC Power Cable
Power Switch in
the front cover
remains OFF.