NEC WL1700-MS Installation Manual - page 110
Data Assignment
Chapter 4
INITIAL SETUP
76
The following is an example when connecting a PC to the Ethernet connector on
the WL1700-MS. WL1700-MS must be provided electricity from PoE Feeding
Adaptor or PoE Hub. Use straight cables to connect to the Ether connector of
WL1700-MS.
Text and Syntax Conventions
The following Text and Syntax Conventions are used in this guide.
Table 1. Text and Syntax Conventions
Convention
Meaning
Use
Italic
text
White
Indicates parts of
commands that you have
to type.
You must enter set user and
password in the following
command, but tom and nec are
replaceable:
Orange
Indicates command
variables that you replace
with appropriate values.
Rear
10BASE-T/100BASE-TX (Straight cable)
Setup PC
㧨
Example of Network Settings
㧪
IP Address
㧦
192.168.100.11
Subnet Mask
㧦
255.255.255.0
PoE Feeding Adaptor/
PoE HUB
>
set user
tom
password
nec