NEC WL1700-MS Installation Manual - page 98
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Access Point Installation
Chapter 3
INSTALLATION
64
5
Put a LAN cable through the port connecting hole of the mounting bracket,
and connect it to WL Access Point.
6
Match the positions of WL Access Point and Mounting bracket, and insert a
Phillips driver into the driver slot labelled Lock. And then push it to fix the
AP until a click is heard.
Note.
Please leave 20cm (7.9 inch) or more between AP and external antenna when
connecting an external antenna to WL1500-AP.
Fixed
T Bar