NEC WL1700-MS Installation Manual - page 144
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Data Assignment
Chapter 4
INITIAL SETUP
110
The following is an example when connecting a PC to the Ethernet connector on
the WL1700-MS. WL1700-MS must be provided electricity from PoE Feeding
Adaptor or PoE Hub. Use straight cables to connect to the Ether connector.
After connecting a PC with a WL Controller, activate Web Browser in a
maintenance PC, and enter
https://192.168.100.10
in the URL.
Rear
10BASE-T/100BASE-TX (Straight cable)
Setup PC
㧨
Example of Network Settings
㧪
IP Address
㧦
192.168.100.11
Subnet Mask
㧦
255.255.255.0
PoE Feeding Adaptor/
PoE HUB