NEC WL1700-MS Installation Manual - Data Assignment
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Data Assignment
Chapter 4
INITIAL SETUP
74
Data Assignment
Use Command Line Interface (CLI), Web Interface (WebView) or Initial Setup to
assign data for WL Controller and Access Points.
Assign the data by referring to the following:
Order Setup Tool
WL Equipment Remarks
1
CLI Setup Data
Assignment
(
)
WL5100
SCA-WL10
Used to set up details of the
data settings by command via
telnet.
WebView Setup Data
Assignment
(
WL5100
SCA-WL10
Provides data setup by Web
Browser.
In the case of using this setup
tool, Internet Explorer 6.0 is
required.
2
Initial Setup
(
WL1700-MS
Provides easy data setup from
an initial state by Web
Browser.
In the case of using this setup
tool, Internet Explorer 6.0 is
required.