NEC WL1700-MS Installation Manual - page 134
Data Assignment
Chapter 4
INITIAL SETUP
100
34
Specify QoS settings (Voice Extension Function).
This Quality of Service (QoS) function is to distinguish Layer 3 from Layer 2,
to track marking, to set transferring queue of APs.
Type
set radio-profile {Radio Profile Name} qos-mode {svp (SpectraLink
Voice Priority) | wmm (Wi-Fi Multi-Media) | voice-extension (Voice
Extension Function)}
to specify QoS.
The following is an example when Voice Extension Function is enabled in
Radio Profile (
AP1-RF
). In this case, it is required to specify the detailed
parameters in the next step.
35
Specify VoIP bandwidth (Voice Extension Function).
Reserve wireless bandwidth for Voice Extension Function.
Type
set radio-profile {Radio Profile Name} max-voip-bw {VoIP bandwidth
(Kbps)}
.
The following is an example when Radio Profile (
AO1-RF
) reserves
bandwidth (
928
Kbps).
36
Disable RF modules of APs.
Disable RF modules of APs to be configured.
The following is an example when AP number (
1
)’s RF Number (
1
and
2
) and
AP number (
2
)’s RF Number (
1
) are disabled.
37
Assign channels manually.
Before specifying channel settings, disable auto-tuning channel
configurations function. For more information, refer to the
.
WL111111#
set radio-profile
AP1-RF
qos-mode
voice-extension
WL111111#
set radio-profile
AP1-RF
max-voip-bw
928
Basic Settings
WL111111#
set ap
1
radio
1
mode disable
WL111111#
set ap
1
radio
2
mode disable
WL111111#
set ap
2
radio
1
mode disable
Basic Settings