NEC WL1700-MS Installation Manual - page 17
Introduction
xv
Caution!
Any charges or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
For operation within the 5.15 – 5.25 GHz frequency range, use is restricted to an indoor
environment.
Radio Frequency Compliance Information (European Union)
The UNIVERGE WL Access Point has been tested and found to comply with
European Telecommunications Standard (ETS) 300 328 for 2.4-GHz equipment
and ETS 301 893 for 5-GHz equipment. These standards cover wide band data
transmission systems referred to in European Conference of Postal and
Telecommunications Administrations (CEPT) recommendation T/R 10.01.
Warning for electromagnetic waves
Use of wireless LAN (5GHZ) feature is limited to internal use by electromagnetic
wave laws.
This equipment operates in the same frequency bandwidth as industrial, scientific,
and medical devices such as microwave ovens and mobile object identification
(RF-ID) systems (licensed premises radio stations and unlicensed specified
low-power radio stations) used in factory production lines.
1. Before using this equipment, make sure that no premises radio stations or
specified low-power radio stations of RF-ID are used in the vicinity.
2. If this equipment causes RF interference to a premises radio station of
RF-ID, promptly change the frequency or stop using the device; contact
your distributor or NEC and ask for recommendations on avoiding radio
interference, such as setting partitions.
3. If this equipment causes RF interference to a specified low-power radio
station of RF-ID, contact the distributor or a local business center.
4. On 2.4 GHz features, “2.4 GHz frequency band / modulation method /
assumed interference distance / possibility of changing frequency” is
indicated.