NEC WL1700-MS Installation Manual - page 157
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Data Assignment
Chapter 4
INITIAL SETUP
123
5
Specify a system IP address for WL Controller.
Select
[Controller]
-
[System]
on the main menu. Specify the following and
click the
Apply
button.
Changing the system IP address of WL Controller will cause all the related APs to
reset.
If you specify a system IP address different from the interface IP address and it is
applied to the WL Controller, the screen will not be able to display. Therefore,
before saving configuration, check to see the system IP address by selecting
[Monitoring]
-
[Summary]
.
ITEMS
REMARKS
System IP Address
Assign a system IP address for WL Controller.
[Basic Setting: 192.168.10.10]
Basic Settings