NEC WL1700-MS Installation Manual - page 177
Manual is about: UNIVERGE WL Series Wireless Controller
of
226
Data Assignment
Chapter 4
INITIAL SETUP
143
20
Restart the system.
This will restart the WL Controller.
Select
[Commands]
-
[Save Configuration]
on the main menu. Click the
Reset
button to restart the WL Controller. Confirmation screen is displayed.
Click the
Save and Reset
button to save the configurations.
When WL Controller restarts, it reads the new configuration.
At the same time, the related APs automatically reset, download the new
configuration from the WL Controller, and are activated with the new
configuration.
Basic Settings