Oce VarioStream 7000 SINGLE Operating Manual - page 118
5.4.2 Manual paper insertion after a paper jam
118
A29246-X20-X-4-7680 / fa502_pinfed.fm
17.
Return the lever for the distance of the
tension rollers to the NORMAL
position.
18.
Only for printing systems with heated
preheating saddle:
Close cover above the preheating
saddle.
19. An automatic cleaning phase is now performed. The message "Cleaning cycle
underway" is displayed in the operator panel.
20.
When the message "Cleaning cycle
underway" disappears, adjust a fold
perforation with the ADVF and ADVR
keys so that it lies at the adjustment
ruler marking that corresponds to the
paper format length (fold length).
Important
In P mode, in order for printing to begin on the upper page at every job start, there
must be a positive fold (^) at the adjustment ruler marking.
Proceed as follows: