Oce VarioStream 7000 SINGLE Operating Manual - 3.4 Paper Specifications

3.4 Paper specifications

A29246-X20-X-4-7680 / fa301.fm

55

3.4 Paper specifications

This section contains information on the following topics:

3.4.1 General information >>> page 55

3.4.2 Paper types >>> page 55

3.4.3 Paper handling >>> page 56

3.4.1 General information

To ensure maximum system availability, the paper must comply with the paper 

specifications and be stored in an environment with suitable ambient conditions.

Non-compliance with the paper specifications can cause damage to the printing system and 

may also result in the release of substances from the paper which can contaminate the 

environment or have a detrimental effect on health. Océ Printing Systems GmbH accepts 

no liability for such damages.

The printing system is designed to process a wide range of paper types. However, the 

operational properties of the printing system and the print quality also depend on factors 

such as:

• Paper quality

• Grammage

• Moisture content

• Dimensional stability

• Smoothness, etc.

3.4.2 Paper types 

All media that comply with the requirements of the electrophotographic printing method can 

be used in all specified formats and paper weights. 

Using other paper qualities may result in reduced operational results, lower availability and 

possibly also higher usage of consumables and expendables.

Note

When using continuous rollpaper, observe the operating instructions for the paper pre- 

and post-processing devices.