Oce VarioStream 7000 SINGLE Operating Manual - 6.2 Cleaning Intervals
6.2 Cleaning intervals
A29246-X20-X-4-7680 / fa601.fm
177
6.2 Cleaning intervals
The table shows the cleaning activities required for reliable and stable print operation:
Time and display on operator panel
Cleaning location
See section
After every change of shift
or every 8 hours
Paper path
6.3 Cleaning the paper
path >>> page 189
Plastic strips and particle
bin
6.4 Cleaning plastic
strips >>> page 188
Fuser station
6.5 Cleaning the fuser
station >>> page 191
Weekly or after 500,000 pages
Developer station
6.7 Cleaning the
developer station >>>
page 203
When replacing consumables
Oiling unit in the fuser
station
6.5 Cleaning the fuser
station >>> page 191
Toner dust indicator
7.3.11 Replacing the
fine filter >>> page 330
Toner supply bin
surrounding area
7.2.1 Replacing the
toner bottle >>> page
226
Container for waste toner
bottle
7.2.3 Replacing the
waste toner bottle >>>
page 233
After paper has wrapped itself around the
fuser roller.
Soft fuser roller
6.6 Cleaning the soft
fuser roller >>> page
199
Toner concentration too low
Toner mark not detected
Background too high
Toner mark sensor
6.8.1 Cleaning the toner
mark sensor >>> page
207
No paper movement
Paper motion sensor and
mirror
Edge control error
Paper edge sensor in the
fuser station
6.9.2 Cleaning the paper
edge sensor in the fuser
station >>> page 219