Oce VarioStream 7000 SINGLE Operating Manual - page 254
of
384
7.2.5 Replacing the fuser oil bottle
254
A29246-X20-X-4-7680 / fa701.fm
Install the fuser oil bottle
Caution
Observe the safety directives before installing the fuser oil bottle (see section 7.2.5
Replacing the fuser oil bottle, page 252).
Proceed as follows:
1.
Insert the new fuser oil container so
that the handle points outwards.
2.
Wipe away any spilled oil with a paper towel.
Important
The hose can bend. The fuser oil cannot be filled in this case.
Ensure that the hose is not bent when you tip back the vacuum container.
3.
Swivel back the fuser oil bottle holder
with the full fuser oil bottle. Make sure
that there is no bend in the hose.
1 of 2