Oce VarioStream 7000 SINGLE Operating Manual - page 325
7.3.9 Replacing the pressure roller
A29246-X20-X-4-7680 / fa703.fm
325
Note
Only if paper post-processing is connected:
Remount deflection rollers on the stacker platform.
10. Enter on the operator panel whether a new pressure roller has been fitted:
•
The message on the operator panel is deleted automatically, the replacement of
the pressure roller is recorded in the
•
If the pressure roller was not replaced but only cleaned, for example,
the process is documented in the
Status display in the Consumables history:
11. Click the following button on the operator panel to complete pressure roller
replacement:
All printing system assemblies are checked (duration approx. 2-3 minutes) before
the printing system is switched to the "Ready" status.
In both cases, the message on the operator panel is automatically deleted, and the
replacement of the pressure roller is recorded in the
Proceed as follows:
3 of 3