Oce VarioStream 7000 SINGLE Operating Manual - page 291
7.3.5 Replacing the active filter
A29246-X20-X-4-7680 / fa703.fm
291
7.3.5 Replacing the active filter
Observe the following safety directives when replacing the active filter:
The printing system detects the end of the active filter's service life automatically and
displays a warning on the operator panel. The following procedure is for replacing the active
filter:
- Remove active filter >>> page 291
- Install active filter >>> page 294
Remove active filter
Caution
• The components in the fuser station reach a surface temperature of approximately
230
o
C during operation.
• Danger of burning if touched.
• Do not touch any parts behind the safety covers identified with the icon
.
• Wear heat protection gloves when working with fuser station components.
Important
Keep used active filter ready for collection by service or the contracted shipping
company .
Proceed as follows:
1.
If the printing system has not yet stopped, click the following button:
2.
Select the
panel.
1 of 3