Oce VarioStream 7000 SINGLE Operating Manual - page 134
of
384
5.8.1 Creating a new setup or changing a setup
134
A29246-X20-X-4-7680 / fa508.fm
5.8.1 Creating a new setup or changing a setup
Requirements for saving setups:
• The "key operator" or an operator authorized by the key operator must be logged in.
• There can be no error message present.
Proceed as follows:
1.
If the printing system has not yet stopped, click the following button:
2.
On the operator panel select:
• For universally valid print job setups:
• For channel-specific setups:
3.
Select setup in the "Setup List" tab.
4.
If this setup is not yet loaded, click the following button:
5.
Click "Setup Contents" tab and check settings.
6.
Adjust settings as required in the menus under
1 of 2