Oce VarioStream 7000 SINGLE Operating Manual - page 315
of
384
7.3.8 Replacing the fuser roller
A29246-X20-X-4-7680 / fa703.fm
315
Install new fuser roller
14.
Loosen the two knurled screws for the
holder claws on the fuser roller insert.
Remove the fuser roller insert from the
old fuser roller.
15. Insert the cooled fuser roller in the carton and make ready for collection.
Caution
Observe the safety directives before installing the fuser roller (see section 7.3.8
Replacing the fuser roller, page 312).
Proceed as follows:
4 of 4