Oce VarioStream 7000 SINGLE Operating Manual - 6.13 Cleaning The Filter
6.13 Cleaning the filter
220
A29246-X20-X-4-7680 / fa605.fm
6.13 Cleaning the filter
5.
Click the following button to switch the printing system to the "Ready" status:
Caution
There can be a high build-up of static charge when vacuuming the toner spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rubber nozzle
and filter set for fine dust. For larger quantities of toner spill (e. g. full bottle), the
industrial vacuum cleaner must be explosion-proof.
Before cleaning the filter, please observe the other safety directives in section 6
Cleaning the printing system >>> page 175.
Proceed as follows:
Important
You can only carry out filter cleaning when in the "Stop" or "Operator intervention
necessary" status.
1.
If the printing system has not yet stopped, click the following button:
2.
Open the cover and both doors at the front of the printing system.
1 of 3
Proceed as follows:
2 of 2