Oce VarioStream 7000 SINGLE Operating Manual - page 87
4.3.3 Setting parameters
A29246-X20-X-4-7680 / fa405.fm
87
4.3.3 Setting parameters
All parameters of the printing system can be set at the operator panel. The following
prerequisites must be given:
• The necessary rights are available. These rights are allocated by the respective "Key
Operator" in the
• The access ticket for this operator panel is requested (see section 4.3.2.1 Logging on as
user and requesting the access ticket, page 85).
• The printing system is in "Stop" or "Error" status. When the printing system is running, the
parameters can only be checked but not reset.
The following steps must be carried out to set parameters:
4.3.3.1 Selecting settings and entering values >>> page 88
4.3.3.2 Apply or reset parameters >>> page 89