Oce VarioStream 7000 SINGLE Operating Manual - page 326
of
384
7.3.10 Replacing the waste collector
326
A29246-X20-X-4-7680 / fa703.fm
7.3.10 Replacing the waste collector
The following procedure is for replacing the waste collector:
- Remove waste collector >>> page 326
- Install waste collector >>> page 328
Remove waste collector
Proceed as follows:
1.
If the printing system has not yet stopped, click the following button:
2.
Open side door of fuser station.
Caution
The components in the fuser station reach a surface temperature of approximately
230
o
C in operation.
If you touch them, you may burn yourself.
Do not touch any parts behind the safety covers identified with the icon
.
3.
Turn the knob of the oiling unit to the
left and swivel on oiling unit.
1 of 3